中文版English

Products

Home>MHL

Micro-B Plug to HDMI Plug Passive

Part Number: RHMUB-0007
(Note: The part number is only for reference. If you have requirement,
please contact Amphenol for further confirming PN and drawing)
Product Description: Micro-USB B Plug to HDMI Plug Passive Cable Assembly
Series:MHL
Cable Length:1.5 meters
Wire Size:30AWG*1P+#28*3C+AB.OD:4.0MM
Plating:Au(30u” min) over Ni(50u' min)
Color: Black
Environmental Compliance:ROHS
Flammability:Cable VW-1, Overmold 94V-0

Micro-B Plug to HDMI Plug Passive

Part Number: RHMUB-0007
(Note: The part number is only for reference. If you have requirement,
please contact Amphenol for further confirming PN and drawing)
Product Description: Micro-USB B Plug to HDMI Plug Passive Cable Assembly
Series:MHL
Cable Length:1.5 meters
Wire Size:30AWG*1P+#28*3C+AB.OD:4.0MM
Plating:Au(30u” min) over Ni(50u' min)
Color: Black
Environmental Compliance:ROHS
Flammability:Cable VW-1, Overmold 94V-0

Applications

1.Connect Cell phone and HDTV via MHL cable assembly for Play HD video up to 1080P

2.Control HDTV via cell phone

 

Features and Benefits

The passive MHL-HDMI cable assembly features a 5-pin microUSB plug on one end and HDMI-A (female) on the other. This cable assembly connects a MHL-enabled portable device to an MHL HDTV, and its small form factor makes it easy to carry around with your mobile device.

This cable assembly features:

1.1080p HD video

2.Digital audio

3.Simultaneous charging to the mobile device

4.TV remote access and control on mobile device

 

Mechanical Performance

1. Mating Force and Unmating Force

Condition: EIA 364-13,USB2.0 Micro B plug at a max rate of 12.5mm per minute.

Requirement:

Mating Force: 35N max.

Unmating Force: Micro-B plug 8N min initial.

HDMI A Plug at a max rate of 25.0mm per minute.

Requirement:

Mating Force: 39.2N max.

Unmating Force: HDMI A Plug 9.8N min initial.

2. Durability

   Condition: EIA 364-09, USB 2.0 Micro B at a max rate of 500 cycles per hour

   Requirement:

   No physical damage of Micro-USB B plug after 10000 cycles mating

   HDMI A plug at a max rate of 100 cycles per hour

   Requirement:

   No physical damage of HDMI A Plug after 10000 cycles mating

3. Cable Flex

   Apply a 40N static axial load 15cm

   Requirement: There shall be no demage and open/short failure

4. Bend test

USB 2.0 Micro B:

Apply a 200g static load at a distance 15cm from the SR.  Bend the SR at a bending angle of +/-90 o for 1000cycles at a speed 40 cycles/minute.

Requirement: There shall be no open/short failure

 

Electrical Performance

1. Contact Resistance

30mohm max,+10mohm max change for post test

2. Dielectric Withstanding Voltage

300VAC/min. No flashover, no spark over, no excess leakage and no breakdown.

3. Insulation Resistance

 

Product Environmental Compliance

RoHS 2.0: Compliant

China RoHS: Yes

REACH SVHC: Yes

Low-Halogen Status: Not Reviewed

 

Packing

Per Amphenol’s Site Operating Procedure #SOP-708 REV 2

 

 



Last:没有了!
Next:Micro-B Plug to HDMI Receptacle Active