中文版English

Products
 

Home>Slim SATA

Slim SATA 6P to Power Connector

Part Number: RST06-0018
(Note: The part number is only for reference. If you have requirement, please contact Amphenol for further confirming PN and drawing)
Product Description: Slim SATA 6P to Power Connector
Series: SATA
Cable Length: 0.43 meters
Wire Size: UL1007,22AWG,Tinned Copper, OD:1.6MM
Plating: Au 15u” over Ni 50u”min
Color: Cable Red、Black, Over mold Black
Environmental Compliance: ROHS
Flammability: Cable VW-1, Overmold 94V-1

Slim SATA 6P to Power Connector

Part Number: RST06-0018
(Note: The part number is only for reference. If you have requirement, please contact Amphenol for further confirming PN and drawing)
Product Description: Slim SATA 6P to Power Connector
Series: SATA
Cable Length: 0.43 meters
Wire Size: UL1007,22AWG,Tinned Copper, OD:1.6MM
Plating: Au 15u” over Ni 50u”min
Color: Cable Red、Black, Over mold Black
Environmental Compliance: ROHS
Flammability: Cable VW-1, Overmold 94V-1

Applications

    Power Supply

1. Independent Disks

2. CD driver

3. Workstations

4. Servers

5. Storage rack

 

Features and Benefits

1. Meet SATA 3.0 specification

 

Mechanical Performance

1. Mating Force and Unmating Force

Condition: EIA 364-13. Insert and extract at a speed of 12.5mm/minute.

Mating Force: 45 N max

Unmating Force: 10 N min for cycles 1 through 5. 8N min after 50 mating/unmating (at rate of 200cycles per hour) cycles.

2. Durability:

Condition: EIA 364-09. Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.

No physical damage and shall meet requirements of subsequent test.

   

Electrical Performance

1. Contact Resistance

Condition: EIA 364-23. Subject mated contacts assembled in housing to 20mV maximum. Open circuit at 100mA maximum.

30 mohm max, initial per contact mated pair. 15 mohm max, after stress per contact mated pair.

2. Dielectric Withstanding Voltage

Condition: EIA 364-20. Method B. Test between adjacent of mated and unmated connector assemblies. The dielectric shall withstand 500 VAC for 1 minute at sea level.

No flashover, no spark over, no excess leakage and no breakdown.

3. Insulation Resistance

Condition: EIA 364-21. Method C. Measure the insulation resistance between the adjacent contacts of mated and unmated connector assemblies.

The IR shall be 1000 Mohm min.

 

Product Environmental Compliance

RoHS2.0: RoHS 2.0 Compliant

China RoHS: Yes

REACH SVHC: Yes

Low-Halogen Status: Not Reviewed

 

Packing

Per Amphenols Site Operating Procedure #SOP-708 REV 2

 



Last:没有了!
Next:没有了!