中文版English

Products

Home>USB3.0

USB3.0 A Plug to B Plug

Part Number: RUB30-0118
(Note: The part number is only for reference. If you have requirement,
please contact Amphenol for further confirming PN and drawing)
Product Description:USB 3.0 A Plug to USB 3.0 B Plug
Series:USB 3.0
Cable Length:1.8 meters
Wire Size:USB 3.0 Cable:#30*2P+#30*1P+#24*2C+AB,85%,OD5.0mm,Black.
Plating:Au(30u”min) over Ni(50u”min)
Color: Black
Environmental Compliance:RoHS 2.0
Flammability:Cable VW-1, Overmold 94V-0

USB3.0 A Plug to B Plug

Part Number: RUB30-0118
(Note: The part number is only for reference. If you have requirement,
please contact Amphenol for further confirming PN and drawing)
Product Description:USB 3.0 A Plug to USB 3.0 B Plug
Series:USB 3.0
Cable Length:1.8 meters
Wire Size:USB 3.0 Cable:#30*2P+#30*1P+#24*2C+AB,85%,OD5.0mm,Black.
Plating:Au(30u”min) over Ni(50u”min)
Color: Black
Environmental Compliance:RoHS 2.0
Flammability:Cable VW-1, Overmold 94V-0

Applications 

    1.Monitor

    2.CD-ROM

    3.Audio Input/Output System

    4.Modem

    5.Keyboard

    6.Mouse

    7.Scanner

    8.Printer

Features and Benefits

    The Third Generation USB 3.0 maximum data rate of 5Gbps,downward compatible with USB1.0/1.1/2.0.

 

Mechanical Performance

    1. Mating Force and Unmating Force

       Condition: EIA 364-13, at a max rate of 12.5mm per minute.

       Requirement:

       Mating Force: 35N max.

       Unmating Force: USB-A:10N min initial.

     2. Durability

       Condition: EIA 364-09 at a max rate of 200 cycles per hour

       Requirement:

       USB 3.0 A plug1500 cycles, USB 3.0 B plug 1500 cycles, No physical damage

Electrical Performance

1. Contact Resistance

          30 mΩ (Max) initial for VBUS and GND contacts.

          50 mΩ (Max) initial for all other contacts.

      2. Dielectric Withstanding Voltage 100VAC/min.

         No flashover, no spark over, no excess leakage and no breakdown.

      3. Insulation Resistance

        100M ohm min

      4. Differential Impedance

         Mated area 90 +/- 15 ohm, cable area 90 ohm +/-7 ohm

    5. Differential-to-Common-Mode Conversion

         ≤-20dB@100MHz to 7.5GHz

      6. Differential Near-End Crosstalk Between SuperSpeed Pairs  

       USB 3.0 Standard-A connectors: 0.9%

       USB 3.0 Standard-B connectors: 1.8%

7. Signal Attenuation  

        USB Spec 3.0 section see the following as upper limit

         100 MHz, -1.5 dB,

       1.25 GHz, -5.0 dB,

         2.5 GHz, -7.5 dB,

7.5 GHz, -25 dB.

 

Product Environmental Compliance

RoHS2.0: RoHS 2.0 Compliant

China RoHS: Yes

REACH SVHC: Yes

Low-Halogen Status: Not Reviewed

 

Packing

Per Amphenol’s Site Operating Procedure #SOP-708 REV 2

 



Last:没有了!
Next:Internal USB3.0 plug to plug