中文版English

Products
 

Home>Signal SATA 7Pos

SATA 7P STR TO STR

Part Number: RST07-1267
(Note: The part number is only for reference. If you have requirement,
please contact Amphenol for further confirming PN and drawing)
Product Description: SATA 7P Straight to straight Cable Assembly
Series: SATA
Cable Length: 0.61 meters
Wire Size: 30AWG, Tinned Copper,OD:1.70*5.70mm
Plating: Au(15u” min) over Ni(50u” min)
Color: Cable Jacket RED, Over mold Black
Environmental Compliance: ROHS
Flammability: Cable VW-1,Overmold 94V-1

SATA 7P STR TO STR

Part Number: RST07-1267
(Note: The part number is only for reference. If you have requirement,
please contact Amphenol for further confirming PN and drawing)
Product Description: SATA 7P Straight to straight Cable Assembly
Series: SATA
Cable Length: 0.61 meters
Wire Size: 30AWG, Tinned Copper,OD:1.70*5.70mm
Plating: Au(15u” min) over Ni(50u” min)
Color: Cable Jacket RED, Over mold Black
Environmental Compliance: ROHS
Flammability: Cable VW-1,Overmold 94V-1

Applications

    Data/Communications

    1.Independent Disks

   2.CD driver

     3.Workstations

     4.Servers

     5.Storage rack

 

Features and Benefits

    1.Transmission rate 6 Gbps.

    2.Meet SATA 3.0 specification.

 

Mechanical Performance

     Mating Force and Unmating Force

    Condition: EIA 364-13, insert and extract at a speed of 12.5mm/minute

     Mating Force:   45 N maximum

     Unmating Force: 10 N minimum

     Durability:

Condition: EIA 364-09.

Mated and Unmated connector for 50cycles at a rate of 200 cycles per hour.

There shall be no physical damage and shall meet requirements of subsequent test.

 

Electrical Performance

     1. Contact Resistance

   Condition: EIA 364-23. Subject mated contacts assembled in housing to 20mV maximum. Open circuit at 100mA maximum.

   30 mohm maximum, initial per contact mated pair. 15 mohm maximum, after stress per contact mated pair.

     2. Dielectric Withstanding Voltage

   Condition: EIA 364-20. Method B. Test between adjacent of mated and unmated connector assemblies.

   The dielectric shall withstand 500 VAC for 1 minute at sea level. There shall be no flashover, no spark over, no excess leakage and no breakdown.

     3. Insulation Resistance

  Condition: EIA 364-21. Method C. Measure the insulation resistance between the adjacent contacts of mated and unmated connector assemblies.

 The IR shall be 1000 Mohm minimum.

 

Product Environmental Compliance

       RoHS2.0:  Compliant

       China RoHS: Yes
       REACH SVHC: Yes
       Low-Halogen Status: Not Reviewed

 

Packing 

       Per Amphenol’s Site Operating Procedure #SOP-708 REV 2

 



Last:没有了!
Next:SATA 7P RA to 7P RA WO/Latch